Remote Controllers - questions and troubleshooting.

How do I program my Remote to control my TV (power and volume).

MINERVA WEBslim

  1. Make sure the TV and Set top box are turned on.
  2. Press the Device Key "TV" (It is a small round button near top of remote).
  3. Press and hold SETUP until button blinks twice.
  4. Press 9-1-1 (LED blinks twice)
  5. Press CH+ repeatedly until device turns off.
  6. Press SETUP when device turns off.
  7. Your remote is now programmed to communicate with your TV.

 

 

POTENZA WEBslim

  1. Press TV button
  2. Press and hold Set Up until TV button blinks twice
  3. Press TV button
  4. Press and hold <number for TV type> button until TV shuts off.
  5. Release <number for TV type> button

       Numbers For TV Types: 0 Westinghouse, 1 Insignia, 2 LG, 3 Panasonic, 4 Phillips, 5 Samsung, 6 Sanyo, 7 Sharp, 8 Sony, 9 Vizio

 

 

ROYAL WEBslim

  1. Press and hold Set Up until Cable button blinks twice.
  2. Press TV button.
  3. Press and hold <number for TV type> until TV shuts off.
  4. Release <number for TV type>

       Numbers For TV Types: 0 Vizio, 1 Insignia/Dynex, 2 LG/Zenith, 3 Mitsubishi, 4 Panasonic, 5 Phillips/Magnovox, 6 Samsung, 7 Sharp, 8 Sony, 9 Toshiba

 

My remote is not working what do i do?

  1. First press the "TV" button on the remote, then the power button on the remote, and finally the "CBL" or "STB" button on the remote.
  2. If nothing happens, make sure there are working AA batteries in the remote.
  3. If it still doesn't work, call our office at (715) 824-5517 for assistance or stop by our office.

tv on my side

Hours
Mon - Fri: 8am to 5pm

secureit

Main Office Phone
(715) 824-5529

diggers hotline

Tech Support (24 hours)
(715) 824-5517

email login

speed test